Aer Block TM
Autoclaved Aerated Concrete

Suppliers of AAC Building Products/Tools and Equipment

Home   >    History   >    AAC Attributes   >    Blocks, Panels & Installation   >    Finishes, Tools & Equipment   >    Projects   >    Contact

Standard Block and Panels

  • 'Solid', 'O', and 'U' Block come in a standard length of 24", a height of 8" and will vary in width.
  • Solid Block comes in widths of 2", 4", 6" up to 12". 
  • 'O' or Core Block comes in 6", 8", 10", & 12" widths and are drilled out 3"- 4" in diameter to allow for the placement of vertical re-bar and cement grout.         
  • 'U' Block come in similar widths and are used to cast reinforced lintels over doors and windows as well as perimeter bond beams.


Solid, O and U Block
click on image for enlargement

Jumbo Block 

Jumbo Block are a standard 24" in height,  32" -  48" in length and come in widths of 4", 6", 8" ... up to 18". The larger block widths require a Minicrane to lift and place.

Steel-Reinforced Panels

Panels are a standard 24" in height, come in widths of 4", 6", 8", 9.6", & 12" and up to 20' in length in the larger widths. They are reinforced with embedded welded steel cages and come in an assortment of profiles: Flat to Flat, Flat to C, T&G, and Key Panels. They can be cut to specified lengths at the factory and trucked directly to the building site. Panels are placed in position with jobsite crane and specialized panel clamps. They can be used horizontally and vertically for walls, lintels, partitions, floors, roofs and parapets, etc.

       
   
click on images for enlargement
Panel construction Taos, NM

Installation

• Blocks are set on a leveling bed to start the initial coursing. 'O' Block is used around doors, windows, at corners and as specified in the field. AAC can be cut with a carbide hand saw, diamond blade circular saw or AAC carbide tooth band saw. Block is glued together with thin-bed mortar using a notch trowel. It is easily drilled and shaped. 'U' Block can be cut to become 'H' Block when doubling a lintel or bond beam course. 'J' Bolts can be set in top bond beam for plates and at knock outs in 'U' Block for casting in place a ledger course. A comparatively minimum amount of concrete is used for grouting the cores and bond beams.

     
   

click on images for enlargement
Harper residence, Crestone Colorado

 

Next  Page  >

site created and maintained by crestonecreations.com